Philips 3 CD CHANGER PRO LOGIC FWP73P37 사용자 설명서 - 페이지 15
{카테고리_이름} Philips 3 CD CHANGER PRO LOGIC FWP73P37에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 3 CD CHANGER PRO LOGIC FWP73P37 31 페이지. Cd mini system
Philips 3 CD CHANGER PRO LOGIC FWP73P37에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
15
To start the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all
available radio stations automatically.
• Press and hold STANDBY ON (on
the system only) for five seconds
when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and
then "AUTO".
™ EASY SET will start searching for
all radio stations on FM band and
then followed by radio stations on
AM band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band,
if there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
OPERATING THE SYSTEM
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on
the remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer
display for the system. You must not
press the DSC button on the system
before using the SOUND 3 or 4
controls.
• Press the SOUND 3 or 4 to select
the desired Equalizer Display,
NORMAL, TOP DOWN, or NITE
MODE.
™ The selected display will be
shown.
NORMAL Display
PROGRAM
STEREO
REPEAT
TIMER
REC
BACK
FRONT
HSD
NEWS
T.A.
AM
MW
FM
LW
60Hz
250Hz
500Hz
1KHz
2KHz
4KHz
8KHz
TOP DOWN Display
PROGRAM
STEREO
REPEAT
TIMER
REC
BACK
NEWS
T.A.
AM
MW
FM
LW
FRONT
HSD
60Hz
8KHz
250Hz
500Hz
1KHz
2KHz
4KHz
NITE MODE Display
PROGRAM
STEREO
REPEAT
TIMER
REC
BACK
FRONT
HSD
NEWS
T.A.
AM
MW
FM
LW
60Hz
250Hz
500Hz
2KHz
4KHz
8KHz
1KHz
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
• Press DIGITAL SOUND
CONTROL (DSC) to select
OPTIMAL, CLASSIC, TECHNO,
JAZZ, ROCK or VOCAL.
™ The selected digital sound is
encircled.
™ "OPTIMAL X, CLASSIC,
TECHNO X, JAZZ X, ROCK
X or VOCAL X" will be
displayed. "X" is the pre-selected
level.
3139 116 19511 ( ENG)