Philips 3 DISC SHELF SYSTEM W-10W FWC1C37 사용자 설명서 - 페이지 12
{카테고리_이름} Philips 3 DISC SHELF SYSTEM W-10W FWC1C37에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 3 DISC SHELF SYSTEM W-10W FWC1C37 28 페이지. Philips home stereo system user's manual
페이지 인쇄
12
FW-
C10
MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3
FM •AM
CD
TUNER
TUNING
SEARCH
DIGITAL
DSC
SOUND
PROGRAM
CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume five seconds later.
pg 01-28/C1-C10/37-En
OPERATING THE SYSTEM
TAPE 1 • 2
VIDEO
MASTER
VOLUME
TAPE
AUX
PRESET
STOP• CLEAR
PLAY• PAUSE PREV
NEXT
DIM
To stop the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.
12
Easy Set
EASY SET allows you to store all
available radio stations automatically.
• Press and hold STANDBY ON (on
the system only) for five seconds
when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed,
and followed by "TUNER" and
then "AUTO".
™ EASY SET will start searching for
all radio on FM band and then
followed by radio stations on AM
band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band,
if there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
16/11/1999, 1:56 PM
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on
the remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.
3139 116 19292 (ENG)