Philips 7000 series 사용자 설명서 - 페이지 15

{카테고리_이름} Philips 7000 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 7000 series 20 페이지. Cordless vacuum
Philips 7000 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (24 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (17 페이지), 정보 (3 페이지), 브로셔 및 사양 (3 페이지), 브로셔 및 사양 (3 페이지), 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (18 페이지), 매뉴얼 (36 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (20 페이지), 사용자 설명서 (14 페이지), 매뉴얼 (33 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (23 페이지), 매뉴얼 (15 페이지), 매뉴얼 (16 페이지), 사용자 설명서 (20 페이지), 문제 해결 매뉴얼 (7 페이지), 사용자 설명서 (22 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (49 페이지), 사용자 설명서 (22 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (21 페이지), 자주 묻는 질문 매뉴얼 (7 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (40 페이지), 빠른 시작 매뉴얼 (20 페이지), 사용자 설명서 (23 페이지), 매뉴얼 (9 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (32 페이지), 매뉴얼 (42 페이지)

Philips 7000 series 사용자 설명서
EN
If you have any problems, visit www.philips.com/support for
a list of frequently asked questions or contact the Consumer
Care Center in your country.
Problem
The appliance does not heat up. The appliance is not plugged in
The appliance does not produce
any steam.
Water droplets drip from the
appliance steamer head.
Possible cause
properly or not switched on.
The appliance is not plugged in
properly or not switched on.
The appliance has not heated up
sufficiently.
You have not pressed the steam
trigger fully.
The water level in the water tank is
too low or it has been fully used up.
The water tank is not in place.
Scales/calc are formed inside the
appliance.
Solution
Check if the mains plug is inserted properly and its wall socket
is working.
Check if the appliance is switched on (power button is found
at the lower handle).
Check if the mains plug is inserted properly and its wall socket
is working.
Check if the appliance is switched on (power button is found
at the lower handle).
Let the appliance heat up for 30 seconds (ECO light flashes).
When the appliance is ready for use, the light turns steady.
Press the steam trigger fully for a few seconds.
Unplug the appliance and refill the water tank.
Insert the water tank properly.
Perform rinsing function (refer to
www.philips.com/welcome
section).
15