Toshiba GA-1200 관리 매뉴얼 - 페이지 40

{카테고리_이름} Toshiba GA-1200에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba GA-1200 46 페이지. Multifunctional digital system quick start guide for scanning functions
Toshiba GA-1200에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (42 페이지)

페이지 인쇄

3 TROUBLESHOOTING

Reception errors

Error code

Error code list

Cause

A sequence error occurred on the USB

interface.

The InternetFax or Email could not be

received properly for any of the following

reasons and thus it was forwarded to a des-

ignated address as an error:

The data are corrupted.

Any of the format, compression

method, resolution and paper size of

the data is not supported by this equip-

ment.

The InternetFax or Email could not be

received properly for any of the following

reasons:

The data are corrupted.

Any of the format, compression

method, resolution and paper size of

the data is not supported by this equip-

ment.

The InternetFax or Email could not be

received properly for any of the following

reasons and thus it was forwarded to a des-

ignated address as an error:

The data are corrupted.

Any of the format, attachment file for-

mat and character set of the data is not

supported by this equipment.

The InternetFax or Email could not be

received properly for any of the following

reasons:

The data are corrupted.

Any of the format, attachment file for-

mat and character set of the data is not

supported by this equipment.

The InternetFax or Email could not be

received properly due to the insufficient

memory space and thus it was forwarded to

a designated address as an error.

The InternetFax or Email could not be

received properly due to the insufficient

memory space.

In the offramp gateway function, the for-

warding of the InternetFax or Email was

stopped by the offramp security setting

because the Fax number of the destination

was not registered in the address book.

Countermeasure

Turn the power of this equipment OFF and

then back ON. If the error still occurs, con-

tact your service technician or service repre-

sentative.

Check the forwarded data. Or refer to the

Scanning Guide and check the data speci-

fications which this equipment can receive.

Then ask the sender to retry the transmis-

sion in an acceptable format.

Refer to the Scanning Guide and check the

data specifications which this equipment

can receive. Then ask the sender to retry

the transmission in an acceptable format.

Check the forwarded data. Or refer to the

Scanning Guide and check the data speci-

fications which this equipment can receive.

Then ask the sender to retry the transmis-

sion in an acceptable format.

Refer to the Scanning Guide and check the

data specifications which this equipment

can receive. Then ask the sender to retry

the transmission in an acceptable format.

Check the forwarded data. Or wait until a

job in process is completed, and then

ensure sufficient space in the memory. Then

ask the sender to retry the transmission.

Wait until a job in process is completed, and

then ensure sufficient space in the memory.

Then ask the sender to retry the transmis-

sion.

Check the Fax number in the RECEPTION

JOURNAL, and then notify the sender that

the forwarding was stopped.

If necessary, refer to the Setup Guide for

Scanning Functions or the Operator's

Manual for Facsimile Function and regis-

ter the Fax number into the address book.