Philips AZ102B 사용자 설명서 - 페이지 5

{카테고리_이름} Philips AZ102B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips AZ102B 14 페이지. Cd soundmachine
Philips AZ102B에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지), 브로셔 (2 페이지), 사용자 설명서 (1 페이지), 서비스 매뉴얼 (11 페이지)

Philips AZ102B 사용자 설명서
AZ102_05_ENG_CCR
2010.3.30

Important notes for users in the U.K.

Mains plug
This apparatus is fitted with an approved
plug proceed as follows:
1.
Remove fuse cover and fuse.
2.
Fix new fuse which should be a BS1362
3.
Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a
value of
3
Amp. If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 3 Amp.
Note:The severed plug must be disposed of to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N),
brown = live (L). As these colours may not correspond with the colour markings iden-
tifying the terminals in your plug, proceed as follows:
Connect the blue wire to the terminal marked N or coloured black.
Connect the brown wire to the terminal marked L or coloured red.
Do not connect either wire to the earth terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and
The Performer's Protection Acts 1958 to 1972.
15:14
Page 5
13 Amp
plug.To change a fuse in this type of
3
Amp, A.S.T.A. or BSI approved type.