Philips AZ5738 사용자 설명서 - 페이지 19
{카테고리_이름} Philips AZ5738에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips AZ5738 28 페이지. Cd soundmachine
Philips AZ5738에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 시작 매뉴얼 (1 페이지), 빠른 시작 매뉴얼 (1 페이지), 사용자 설명서 (27 페이지), 사용자 설명서 (27 페이지), 사양 (2 페이지), 서비스 매뉴얼 (20 페이지)
페이지 인쇄
Setting the screen saver
ON
If set to ON, the screen saver will be activated
when you leave the system in stop or pause
mode for 5 minutes. The default setting is ON.
OFF
If screen saver set to off, in any status, the screen
saver will not activate.
Setting the TV Type
Make sure the format you need is available on
the disc. If not, your setting will be invalid.
4:3PS (Pan and Scan mode)
Select this if you have a conventional TV set and
your DVD is not formatted for wide screen
viewing. A wide picture will display on the whole
TV screen with a portion automatically cut off.
4:3LB (Letterbox mode)
Select this if you have a conventional TV set and
your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower
portions of the TV screen.
16:9 (Wide-screen TV)
Select this if you have a wide-screen TV set (you
must also set your wide screen TV to "full size").
DVD Menu Operations
4:3 PS
(Pan Scan)
4:3 LB
(Letter Box)
416:9
(Wide screen)
Changing the password
You can change the four-digit code used as
Password.
1
In disc mode, press SYSTEM MENU.
icon and press 4.
2
Select
Press 5 / 4 on the remote control to navigate
3
in the menu.
➜ Move to "PASSWORD" and press
4
Use the numeric keys (0-9) to enter your
four-digit code.
➜ The password supplied by default is 0000.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
5
Enter your new code. Then press OK to
confirm.
6
Press SYSTEM MENU again to remove the
menu.
B
.
19