MSI MSI-8000HD 운영자 매뉴얼 - 페이지 38

{카테고리_이름} MSI MSI-8000HD에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI MSI-8000HD 48 페이지. Rf remote display

5.12.1 Antennas Available for a MSI-8000HD

STANDARD ANTENNA

The Standard Antenna is an articulated 1/2 wave 2dBi gain design with a

standard TNC connector that mounts directly on the 8000HD enclosure.

This antenna and coax connector, though resistant to water, is not water-

proof. Seal the TNC base with an adhesive heat shrink boot if this

antenna is exposed to rain.

This Antenna should be vertically oriented and is suitable for most short

to medium range applications.

LONG RANGE OMNI 9dBi ANTENNA

This omnidirectional high gain antenna is remotely mounted

from the 8000HD with a low loss coaxial cable, it increases

the range up to 4 times.

The antenna must be vertically mounted. The vertical

Beamwidth (-3dB point) is 14 degrees.

This antenna is supplied with a 10' (3m) coax cable pre

attached. The 10' cable allows placement of the antenna

above the 8000HD for ease of clearing possible obstacles to

data transmission.

Also available with an N connector for applications

requiring longer coax cable lengths.

VEHICLE MOUNT WHIP ANTENNA

The Vehicle Mount Whip Antenna mounts directly to the roof of mobile

vehicles and is weatherproof.

This 5 dBi gain whip mounts in a 3/4" hole on the roof of mobile vehicles.

The mount includes 17' of low loss coax teminated in a TNC Connector.

MSI-8000HD Operator's Manual

Adhesive

Heat Shrink