Philips BTB2090 사용자 설명서 - 페이지 11
{카테고리_이름} Philips BTB2090에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTB2090 26 페이지. Audio systems
4 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Placement
You can place the system on a flat surface or
mount it on a wall.
Mount on a wall
See the wall mounting instructions included in
the package.
Prepare FM/DAB+ antenna
For better reception, fully extend and adjust the
position of the FM/DAB+ antenna.
Note
•
To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.
Prepare the remote control
1
Open the battery compartment.
2
Insert 1 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the system.
•
Risk of electric shock! When you unplug the AC power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adapter, make sure that you
have completed all other connections.
Note
•
The type plate is located on the back of the system.
Connect the power adapter to:
•
the DC IN socket on the system.
•
the wall outlet.
Set clock
1
Press
to switch the system to standby
mode.
» --:-- is displayed.
2
Press and hold CLOCK/SCAN on the
remote control for two seconds.
EN
9