Philips BTB2465 사용자 설명서 - 페이지 18
{카테고리_이름} Philips BTB2465에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTB2465 26 페이지.
Philips BTB2465에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
7 Other features
Adjust LCD brightness
1
Press and hold MODE for over 3 seconds,
the current DIM setting is displayed.
» By default, it's DIM 2 (the weakest
brightness).
2
Press MODE repeatedly to change LCD
brightness:
» DIM 2 (the weakest) → DIM 1 →
DIM off (the brightest)
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, USB, DAB, or TUNER as the alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for three seconds.
2
Press
/
repeatedly to select
an alarm source (DISC, USB, DAB, or
TUNER)
3
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
and volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
16
EN
Press SLEEP/TIMER repeatedly to view
•
the alarm information and activate or
deactivate the alarm.
» If the timer is activated,
[TIMER](Timer) is displayed.
» If the timer is deactivated, [TIMER
OFF] (timer off) is displayed and
[TIMER](Timer) disappears.
Tip
•
If the DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
Set the sleep timer
•
To set the sleep timer, when the unit
is switched on, press SLEEP/TIMER
repeatedly to select a set period of time
(in minutes).
•
[SLP 120]
[SLP 90]
•
[SLP 60]
•
[SLP 45]
•
[SLP 30]
•
•
[SLP 15]
[SLP OFF]
•
» When the sleep timer is activated,
[SLEEP] (sleep)is displayed. Otherwise,
[SLEEP] (sleep) disappears.
Listen from an external
device
You can listen to an external device through this
unit with an audio cable.