Philips BTM2056 사용자 설명서 - 페이지 14

{카테고리_이름} Philips BTM2056에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM2056 21 페이지. Philips btm2056 micro music system short user manual
Philips BTM2056에 대해서도 마찬가지입니다: 빠른 매뉴얼 (3 페이지), 짧은 사용자 설명서 (2 페이지), 짧은 사용자 설명서 (2 페이지), 설치 지침 (2 페이지), 사용자 설명서 (19 페이지)

페이지 인쇄

Select stereo/mono broadcast

Note

•

Stereo broadcast is the default setting for tuner mode.

•

For stations with weak signals: to improve the reception,

change to monaural sound.

In FM tuner mode, press

mono and stereo broadcast.

to switch between

6 Other features

Set the alarm timer

This system can be used as an alarm timer.

You can select CD, FM tuner, or USB as alarm

source.

Note

•

Make sure that you have set the clock correctly.

In standby mode, press and hold TIMER

until [SET TIMER] (set timer) scrolls on the

display.

» [SELECT SOURCE] (select source) is

displayed.

Press SOURCE repeatedly or the source

selection buttons on the remote control to

select a source: disc, FM tuner, or USB.

Press TIMER to confirm.

» The hour digits blink.

Press

Press TIMER to confirm.

» The minute digits blink.

Repeat steps 4-5 to set the minute and

alarm volume.

Tip

•

If the system is idle for 90 seconds, it exits alarm setting

mode automatically.

To activate or deactivate the alarm timer:

In standby mode, press TIMER repeatedly to

activate or deactivate the alarm.

appears when the alarm timer is activated.

Tip

•

If CD or USB is selected as alarm source, yet there

is no disc inserted or no USB connected, the system

switches to the tuner source automatically.

to set the hour.