Philips BTM2280 사용자 설명서 - 페이지 15
{카테고리_이름} Philips BTM2280에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM2280 24 페이지. Wall mounting
Philips BTM2280에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 짧은 사용자 설명서 (10 페이지), 설치 지침 (2 페이지), 사용자 설명서 (26 페이지)
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
Press and hold PROG until the frequency starts
to change.
» All available stations are programmed in the
order of waveband reception strength.
» The first programed radio station is
broadcast automatically.
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
•
To overwrite a programmed radio station, store
another one with its sequence number.
1
Tune to a radio station.
2
Press PROG to activate programming.
» The sequence number blinks.
3
Press
/ to allocate a sequence
number from 1 to 20 to this radio station,
and then press PROG to confirm.
» The preset sequence number and
the frequency of this radio station are
displayed.
4
Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press
/ to select the sequence number of
the preset radio station.
8 Adjust sound
The following operations are applicable to all
supported media.
Select a preset sound effect
Press SOUND repeatedly to select a
•
preset sound effect.
• DSC1, DSC2, DSC3, DSC4, and DSC5
Adjust volume level
On the remote control, press VOL +/-
•
repeatedly.
•
On the main unit, press VOL+/VOL-
repeatedly.
Mute sound
Press MUTE to mute or restore the sound.
•
EN
13