Philips BTM2360/96 사용자 설명서 - 페이지 13
{카테고리_이름} Philips BTM2360/96에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM2360/96 24 페이지.
페이지 인쇄
2
For MP3 tracks, press
album.
3
Press
/
to select a track, and then
press PROG to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press
to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
To erase the program
Press
twice.
Play from Bluetooth-enabled
devices
Note
•
The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•
Any obstacle between the system and the device can
reduce the operational range.
•
Compatibility with all Bluetooth devices is not
guaranteed.
Philips BTM2360
/
to select an
BT
3
PIN
0000
3
1
Press to select the Bluetooth source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTM2360' on your
Bluetooth enabled device and if necessary
input '0000' as the paring password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps twice.
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this product.
•
If you fail to search for "Philips
BTM2360'' or cannot pair with
this product, press and hold
SOURCE/PAIRING (or
remote control) for three seconds until
you hear a beep sound to enter pairing
mode.
Tip
•
The product can memorize up to 8 previously
connected Bluetooth devices.
To disconnect the Bluetooth-enabled device:
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
on the
EN
11