Philips BTM5000 사용자 설명서 - 페이지 17

{카테고리_이름} Philips BTM5000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM5000 22 페이지. Micro system
Philips BTM5000에 대해서도 마찬가지입니다: 빠른 매뉴얼 (3 페이지)

페이지 인쇄
5
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
6
Press PRESET/ALBUM
hour.
7
Press SLEEP/TIMER to confirm.
» The minute digits begin to blink.
8
Press PRESET/ALBUM
minute.
9
Press SLEEP/TIMER to confirm.
» The [VOL] (volume) begins to blink.
10
Press PRESET/ALBUM
the volume, then press SLEEP/TIMER to
confirm.
» The timer is set and activated.
Tip
•
For source selection, you can also press VOL -/+,
PRESET/ALBUM
/
, VOLUME on the main unit.
/
•
For hour/minute/volume adjustment, you can also press
VOL -/+ on the remote control, or
on the main unit.
Activate and deactivate the alarm
timer
1
Press
to switch the unit to standby
mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
» If the timer is activated, the display
shows
.
» If the timer is deactivated,
disappears on the display.
Note
•
In audio in and Bluetooth mode, the alarm timer cannot
be set.
•
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
/
to set the
/
to set the
/
to adjust
on the remote control, or
, VOLUME
/
Play from external audio
device
You can play from an external audio device
such as MP3 player through this unit.
1
Connect the audio device.
• For audio device with red/white audio
output sockets:
Connect a red/white audio cable (not
supplied) to the AUX-IN sockets and
to the audio output sockets on the
audio device.
• For audio device with headphone
sockets:
Connect the audio in cable (not
supplied) to the AUDIO IN socket
and to the headphone socket on the
audio device.
2
Press SOURCE to select AUDIO IN or
AUX source.
3
Play the external audio device.

Adjust display brightness

Note
•
You can adjust the display brightness in standby mode
only.
In standby mode, press RDS/DISPLAY
repeatedly to adjust display brightness.
• Full brightness (100%)
• Half brightness (70%)
• Brightness low (40%)

Headphone

Plug headphones (not supplied) into the
socket on the unit to listen through the
headphones.
EN
15