Clock setting
The clock can be set in either 12-hour or
24-hour mode (12HR or 24HR for example).
1
In standby mode, press PROG.
➜
SET CLOCK is displayed briefly. Then, 12HR
or 24HR is displayed.
2
Press ALBUM • PRESET +/- (or 3 / 4 on
the remote control) to select clock mode. Press
PROG to confirm.
➜
The clock digits for the hours continue to
flash.
3
Press ALBUM • PRESET +/- (or 3 / 4 on
the remote control) to set the hours.
4
Press PROG again.
➜
The clock digits for the minutes flash.
5
Press ALBUM • PRESET +/- (or 3 / 4 on
the remote control) to set the minutes.
6
Press PROG to confirm the time.
pg001-034_BTM630_37-Eng
Timer setting
●
The system can be used as an alarm clock,
whereby the DISC (CD)/TUNER (FM/AM)/
DOCK (iPod)/USB/CARD (SD/MMC) is
switched on at a set time (one time operation).
The clock time needs to be set first before the
timer can be used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER for more than
two seconds.
2
Press SOURCE repeatedly (or the respective
source keys on the remote control) to select the
sound source.
➜
"SET TIMER" and "SELECT SOURCE" are
displayed.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press ALBUM • PRESET +/- (or 3 / 4on the
remote control) to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press ALBUM • PRESET +/- (or 3 / 4 on
the remote control) to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER
once on the remote control.
➜
Display shows
deactivated.
29
Clock/Timer
if activated, and disappears if
2007.6.14, 17:15
29
페이지 인쇄