Philips BTM630/05 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Philips BTM630/05에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM630/05 33 페이지. Bluetooth wireless micro system
Philips BTM630/05에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (35 페이지), 사양 (2 페이지)

페이지 인쇄
Philips BTM630/05 서비스 매뉴얼
BLUETOOTH FUNCTION CHECK
ii). test case for stress test
precondition
No
ECO/ Standby mode
Switch ECO/Standby button and Dock
1
with iPod device on
button for 10 times
dock
Bluetooth wireless
Fast press Play/Pause for 10 times
dock mode with IPod
playback
Fast press >| / |< button for 10 times
press and hold >>| / |<< button for long time
and repeatly
switch to other source repeatly for 5 cycle.
2
Pull out iPod and put into repeatly for 10
times
Bluetooth wireless
Pull out iPod and put into repeatly for 10
dock mode with iPod
times
3
pause/power off
3-2
action
expected result
Ipod can be power on and off, No
abnormal symptom occur
no abnormal playback, no pop
noise and no hang up
function is ok, no abnormal
playback and pop noise, no hung
up
function is ok, no abnormal
playback and pop noise, no hung
up
1.when switch to other source
mode, iPod device is power off
and is charged.
2.when switch back to dock mode,
iPod device can be power on and
playback automatically with no
hang up.
1. iPod device with no hang up
2. No big pop noise
1.no big pop noise and can
playback automatically when put
into again.
2. No hang up
Bluetooth Test Cases Functionality
TESTCASES FUNCTIONALITY PAIRING
No.
Precondition
Action
Expected Results
In any mode.
Make sure the main power of the unit
" PAIRING"
flashes
Bluetooth off.
is on.Press and hold
No bluetooth
ANSWER/PAIRING for 5 seconds.
/1
device
connected.
Set the mobile phone (headset profile,
A device named BTM630 should be
hands free profile) to search for
shown on your mobile phone's screen.
1
/2
Bluetooth devices.
Select the BTM630 for pairing.
The mobile phone should prompt for a
/3
passkey.
Enter passkey "0000".
Main display shows "PHONE
/4
CONNECTED" together with two double
"Beep " sound.
In any mode.
Power off the wireless iPod dock.
Show "DISCONNECT STEREO" about
/1
Bluetooth off.
30 seconds later.
No bluetooth
Make sure the main power of the unit
"PAIRING" flashes on the display.
device
is on.Press and hold
/2
connected.
ANSWER/PAIRING for 5 seconds
Set the A2DP-capable phone to
A device named BTM630 should be
/3
2
search for bluetooth devices.
shown on your mobile phone's screen.
Select the BTM630 for pairing.
The mobile phone should prompt for a
/4
passkey.
Enter passkey "0000".
Main display briefly shows "PHONE
CONNECTED" followed by "STEREO
/5
CONNECTED" together with two double
"Beep " sound.
In any mode.
No bluetooth device connected.
No bluetooth device connected.
/1
Bluetooth off.
No bluetooth
device
Connect a mobile phone not support
No mobile phone is connected.
3
connected.
A2DP bluetooth profile.
/2
Connect a stereo not support A2DP
No stereo is connected.
/3
bluetooth profile.
In paring mode.
Hold the ANSWER /PAIRING button
Pairing mode is canceled, enter standby
4
for 1 second.
mode.
In active
Press and hold the STOP/BAND key
The display shows "DISCONNECT
connection mode.
for 5 seconds.
ALL" together with single "Beep"sound.
5
In any mode.
Power on the BTM630.
Reconnect the bluetooth device come
6
into the range which once paired
automatically.
TESTCASES FUNCTIONALITY AUDIO PLAYBACK
A stereo (A2DP)
Press the FUNCTION button to select
In "iPod /BT" mode.
/1
mobile phone is
"iPod /BT" mode.
connected.
Press PLAY on the mobile phone,main
The music playback will start. And
unit or remote for the first time.
BTM630 display will show "STEREO
/2
CONNECTED".
Press PLAY for the second time.
The music playback will pause.
/3
Press PLAY for the third time.
The music playback will start again.
/4
Press previous/next once.
To select the previous/next track.
/5
Press STOP.
The music is stopped.
/6
1
Press PLAY.
The music will start at the point of stop
just now or at the very beginning just
/7
depand on the stereo mobile.
Press VOL_UP /DOWN.
When the VOL_UP/DOWN key is
/8
pressed, the volume will turn to
higher/lower.
Move between mobile and BTM630
The music should be heard clearly.
/9
within 8 meters without interruption.
Press MUTE.
Come into mute mode.
/10
Press MUTE again or
The mute mode is cleared.
/11
VOL_UP/DOWN.
A stereo (A2DP)
Press the FUNCTION button to select
In any mode except "iPod /BT".
mobile phone is
any mode except "iPod /BT".
/1
connected.
2
Press PLAY on the mobile phone,main
The music will not output from BTM630
unit or remote for the first time.
speaker.
/2
3-2
Pass/Fail/Accept/N
A
Fail behavior (if any) / Remark
Set key
RC
on the display
If the pairing cannot be completed
within one minute, Long beep tone is
heard and the display shows
If the pairing cannot be completed
within one minute, Long beep tone is
heard and the display shows
"FAILED".
If after 5 seconds the display does
not show any message, there are no
active connections to terminate.