Philips BTM630/12 사용자 설명서 - 페이지 15
{카테고리_이름} Philips BTM630/12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM630/12 35 페이지. Bluetooth wireless micro system
Philips BTM630/12에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사양 시트 (2 페이지), 서비스 매뉴얼 (33 페이지)
페이지 인쇄
Switching the system on
●
Press STANDBY-ON B (or B on the
remote).
➜
The system will switch to the last selected
source.
●
Press SOURCE on the top of the system or
CD, iPod, BLUETOOTH, USB/CARD,
AUX or TUNER on the remote control.
➜
The system will switch to the selected source.
Switching the system to standby
mode
●
Press STANDBY-ON B on the system (or B
on the remote).
➜
The backlight for clock display is dim in
standby.
Basic Functions
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.
Switching the system to Eco
Power Standby mode
●
Press and hold STANDBY-ON B on the
system (or B on the remote) for more than 2
seconds.
➜
The backlight will go blank.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after playback has reached the end and
no control is operated.
Adjusting volume and sound
1
Press VOLUME +/- on the system (or VOL +/-
on the remote control) to decrease or increase
the volume.
➜
Display shows the volume level VOL and a
number from MIN 1, 2, ...31 MAX.
2
Press DSC on the remote control repeatedly to
select the desired sound effect: ROCK/POP/
JAZZ/CLASSIC.
3
Press DBB on the remote control to switch
bass enhancement on or off.
➜
If the DBB is activated, DBB ON is shown.
➜
If the DBB is deactivated, DBB OFF is shown.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound and
MUTE will flash on the display.
●
To activate sound reproduction you can:
– press MUTE on the remote control again;
– adjust the volume controls;
– change source.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the rear of the set.
➜
The speakers will be muted.
15