Philips BTM630/12 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Philips BTM630/12에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTM630/12 33 페이지. Bluetooth wireless micro system
Philips BTM630/12에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (35 페이지), 사양 시트 (2 페이지)

페이지 인쇄
Philips BTM630/12 서비스 매뉴얼

BLUETOOTH FUNCTION CHECK

Connect the Bluetooth Wireless Dock
No
precondition
action
No dock is
Power on the main set.
/1
connected to the
main set mode
Connect bluetooth wireless
/2
dock with 10V DC source.
Press and hold the
standby/power key on the
/3
dock for about 6 seconds.
Press and hold the
1
ANSERING/PARING button
on the main set or RC for 5
seconds.
/4
In any mode
Power on the main set.
2
In dock mode
Move between the dock and
main set
3
within 8 meters without
interruption.
3-1
Fail behavior (if any) /
Remark
expected result
Main set is power on.
The red power LED will
be illuminated.
Blue LED shows solid
blue. Dock is powered
and ready to pair.
"PAIRING" flashes on
If the connection can't be
the display. Within 30
completed in one minute
seconds paring and
there will show "FAILED"
connection should be
on the display. Check
completed. Double beep
connections and try again.
tone is heard. Main
display briefly shows
"STEREO
CONNECTED". Blue
LED on dock slowly
flashes blue.
Main set will
automatically reconnect
to the dock every time it
powers on.
The music should be heard clearly.
Test case for Bluetooth Wireless Docking function check
Notice:Before start make sure the Bluetooth Wireless Dock is connected to DC power and powered on.
Make sure the dock is paired and connected to the main set.
i). test case for general function check
precondition
No
ECO/ Standby mode
Press Source/Dock button on RC to power
on set
No button is pressed at normal Standby
mode
No button is pressed at ECO standby mode
1
Bluetooth wireless
connect iPod device with at playback /
dock mode
pause mode.
connect iPod device with at power off mode
2
No device is connected and no button is
pressed
Bluetooth wireless
Press Play/Pause button on main set, RC
dock mode with iPod
and iPod device
playback
Press >| button on main set, RC and iPod
device
Press |< button on main set, RC and iPod
device
Press >>| button on main set, RC and iPod
3
device
Press |<< button on main set, RC and iPod
device
Press VOL_UP/DOWN button on main set,
RC and iPod device
Bluetooth wireless
Press Play/Pause button on main set, RC
dock mode with iPod
and iPod device.
pause
no button is pressed.
4
Bluetooth wireless
Press Play/Pause button on main set, RC
dock mode with iPod
and iPod device
5
power off
no button is pressed
3-1
action
expected result
Set is power on and iPod device
will playback automatically.
iPod display big charging logo.
1.connect iPod device with at
playback or pause mode, iPod
device will be power off.
2.connect iPod device with at
power off mode, iPod device keep
power off mode.
1.iPod device start to playback
automatically.
2.little charge logo is on.
1.iPod device is power on and
playback atomatically.
2.little charge icon is on
main set and the dock will switch
to standby mode after 15 minutes.
IPod playback is paused
Skip to next track with no pop
noise
Skip to former track wit no pop
noise
Delivery track fast forward
function, sound level is decreased
to lower level.
Delivery track fast backward
function, sound level is decreased
to lower level.
When the VOL_UP/DOWN key is
pressed, the volume will turn to
higher/lower level.
iPod device starts to playback.
main set will switch to standby
mode after 15 minutes, and iPod
device is power off and is
charged.
iPod device starts to playback.
iPod device is charged and big
charge logo is displayed.