Philips CD Soundmachine AZ1837 사용자 설명서 - 페이지 11

{카테고리_이름} Philips CD Soundmachine AZ1837에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips CD Soundmachine AZ1837 14 페이지. Cd soundmachine
Philips CD Soundmachine AZ1837에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (19 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (18 페이지), 서비스 매뉴얼 (38 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄
Philips CD Soundmachine AZ1837 사용자 설명서

Program play sequence

You can program up to 20 tracks in the desired
sequence.
1
In stop mode, press PROG to start to
program play sequence.
» [PROG] and [P01] are displayed.
For MP3-CDs: press
»
select an album.
2
Press
/
to select a track.
3
Press PROG to program the track.
» [PROG] and [P02] are displayed.
4
Repeat steps 2 to 4 to select and program
all tracks.
When all 20 tracks are stored, no more
»
tracks can be selected and the display
shows [FUL].
5
To play program, press
•
In stop mode, press and hold
to browse programmed tracks.
6
To delete program, press
» [CLr] is displayed.

Listen to an external device

You can listen to an MP3 player through this
apparatus.
Note
•
When you connect an external device to
LINK jack, the apparatus switches to MP3
LINK source automatically.
1
Use a cable with 3.5mm plugs on both
ends (not supplied) to connect MP3 LINK
jack (3.5mm) on this apparatus and the
headphone jack on an MP3 player.
- ALBUM + to
.
PROG
in stop mode.
MP3

Listen to radio

1
Switch the FM/MW selector to FM or
MW.
2
Turn TUNING+/- until you find optimal
reception.
Tip
•
To improve FM reception, you can extend,
incline or turn the telescopic antenna for best
reception.
•
To improve MW reception, turn the apparatus
to face a different direction.
EN
11