Philips DC146 사용자 설명서 - 페이지 7

{카테고리_이름} Philips DC146에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips DC146 20 페이지. Docking entertainment system
Philips DC146에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (21 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (22 페이지), 사양 (2 페이지), 사용자 설명서 (22 페이지), 사양 (2 페이지), (프랑스어) 설치 설명서 (31 페이지)

페이지 인쇄
Philips DC146 사용자 설명서
FM wire antenna
speaker
(right)

Rear connections

The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
A
AC power cord
B
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-".
1
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the supplied
speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Preparations

speaker
(left)
2
7