Philips DCD3020 사용자 설명서 - 페이지 15
{카테고리_이름} Philips DCD3020에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips DCD3020 32 페이지. Dvd micro theater
Philips DCD3020에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (33 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (41 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (30 페이지)
페이지 인쇄
All manuals and user guides at all-guides.com
Switch to ECO standby mode:
Press and hold
for more than 3 seconds.
» The backlight on the display panel turns off.
» The red Eco Power indicator turns on.
Switch between standby mode and ECO
standby mode:
Press and hold
for over 3 seconds.
Note
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
Set clock
1
In the standby mode, press and hold
CLOCK/DISPLAY for over 3 seconds to
activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
2
Press
/
to set the hour, and then
press CLOCK/DISPLAY again.
» The minute digits are displayed and
begin to blink.
3
Press
/
to set the minute, and then
press CLOCK/DISPLAY WR FRQÀUP WKH
clock setting.
Adjust brightness of display
panel
In standby mode, press DIM repeatedly to
select different brightness levels.
16
EN
Find the correct viewing
channel
1
Press DISC to switch to disc mode.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
Go to the lowest channel on your
TV, and then press the Channel
Down button until you see the blue
screen.
Press the source button repeatedly
on the remote control of your TV.
Tip
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO etc. See the TV user
manual on how to select the correct input on
the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM/MENU.
2
Select [Video Setup].
3
Select [TV System], and then press
4
Select a setting and then press OK.
[NTSC] - For TV with NTSC color
system.
[PAL] - For TV with PAL color
system.
[Multi] - For TV that is compatible
with both PAL and NTSC.
5
To return to the previous menu, press
RETURN/TITLE.
6
To exit the menu, press SYSTEM/MENU.
.