Philips DCM2068 사용자 설명서 - 페이지 10
{카테고리_이름} Philips DCM2068에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips DCM2068 18 페이지. Micro system
Philips DCM2068에 대해서도 마찬가지입니다: 짧은 사용자 설명서 (2 페이지), 사용자 설명서 (18 페이지)
페이지 인쇄
4
Press CD on the remote control to select
the disc source.
» [Reading] (reading) blinks for a
moment, then CD starts playing
automatically. If not, press
Play from a USB storage
device
Note
•
Make sure that the USB device contains playable audio
content.
1
Insert the USB storage device into the
socket.
2
Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Control play (CD/USB mode)
/
Select an audio file;
Press and hold to fast forward
or fast reverse the track during
playback, then release to resume
play.
/
For MP3/WMA tracks, select an
album or folder.
Start or pause play.
OK
REPEAT/
SHUFFLE
.
Program tracks
You can program a maximum of 20 tracks.
1
2
3
4
5
6
Adjust sound
During play, you can adjust volume and select
different sound effects.
Key
VOL +/-
MUTE
Stop play.
Confirm a selection.
[
]: Play the current track
repeatedly.
[
]: (for MP3/WMA only):
Play all tracks in this
album repeatedly.
[
]: Play all tracks repeatedly.
]: Play all tracks randomly.
[
To return to normal play, press
REPEAT/SHUFFLE repeatedly
until the repeat or shuffle icon
disappears.
In CD or USB mode, press
playback.
Press PROG to activate the programming
mode.
» [PROG] (program) is displayed.
For MP3/WMA tracks, press
repeatedly to select an album.
Press
/
repeatedly to select a track,
then press PROG to confirm.
Repeat steps 3-4 to program more tracks.
To play the programmed tracks, press
» During play, [PROG] (program) is
displayed.
• To erase the program, press
Function
Increase or decrease volume.
Mute or resume sound.
to stop
/
.
twice.
EN
10