Toshiba XD-E500 소유자 매뉴얼 - 페이지 14
{카테고리_이름} Toshiba XD-E500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba XD-E500 46 페이지. Upconverting 1080p extended detail dvd player
Toshiba XD-E500에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
C
nnecting to Optional Equipment (Continued)
[ Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home. You can
enjoy motion picture and live concert DVDs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• Use DVDs encoded via the Dolby
Digital recording system.
• Make the following setting.
75 ncoaxial cable (not supplied)
Optical digital cable
(not supplied)
Amplifier equipped with a
Dolby Digital decoder
() ToOPTICAL type
dignal audio input
f:I
e
e
@0~
4====l1f=E3=o=@=@~,
i_F-'
=
bwallouUel
Connect
either
On-screen display
Select:
Page
"Digital Output"
"PCM" or
lID
"Bitslream"
On-screen display
Select:
Page
"Digital Output"
"PCM" or
lB>
"Bitstream"
[ Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting • Make the following setting.
an amplifier and speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby® Digital decoder." Refer to that amplifier's owner's manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound .
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
To audio
input
bwallouUet
' $ ff!=
~
E30'
·0
To ANALOG
AUDIO OUT
• Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
Audio cable (not supplied)