Philips DVD Micro Theater MCD988 사용자 설명서 - 페이지 21
{카테고리_이름} Philips DVD Micro Theater MCD988에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips DVD Micro Theater MCD988 46 페이지. Dvd micro theatre
Philips DVD Micro Theater MCD988에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 사양 시트 (3 페이지), 사용자 설명서 (46 페이지), 사용자 설명서 (43 페이지), 사용자 설명서 (43 페이지), 사용자 설명서 (48 페이지), 서비스 매뉴얼 (36 페이지)
페이지 인쇄
– Before changing the current TV Type setting,
ensure that your TV supports the selected TV Type.
Setting up Progressive Scan feature (for
Progressive Scan TV only)
The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normal TV system). With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals, a
progressive scan TV is required.
2) You have connected the DVD player to your
TV using Y Pb Pr (see "Connections-Step 5:
Connecting TV- Using Component Video jacks".)
1
Turn on your TV.
2
Turn off your TV progressive scan mode or turn
on interlaced mode (refer to your TV user
manual).
3
Press ECO POWER/STANDBY-ON B (B
on the remote) to turn on the DVD player.
4
Select the correct Video Input channel.
➜
The DVD background screen appears on the
TV.
5
Press SYSTEM MENU.
6
Press 1 2 repeatedly to select "VIDEO SETUP
PAGE".
7
Select "TV MODE" to "P-SCAN", then OK to
confirm.
➜
The instruction menu appears on the TV.
8
Press 1 2 to highlight "OK" in the menu and
press OK to confirm.
Getting Started
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
9
Turn on your TV progressive scan mode (refer to
your TV user manual).
➜
The following menu appears on the TV.
0
Press 1 2 to highlight "OK" in the menu and
press OK to confirm.
➜
The setup is complete now and you can start
enjoy the high quality picture.
To deactivate Progressive manually
●
When the distorted sign still appears on
the TV, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1
Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2
Press SYSTEM MENU on the remote to exit
the system menu and then DISC 1 (or DISC
2) and "1" to exit progressive scan.
➜
The DVD blue background screen will appear
on the TV.
Note:
– During normal playback in the progressive scan
mode, press SYSTEM MENU on the remote to exit
the system menu, and then press DISC 1 (or DISC
2) and "1" to exit progressive scan.
21