Toshiba TDP-MT400 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Toshiba TDP-MT400에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-MT400 23 페이지. Dlp projector

페이지 인쇄

Names of each part on the control panel and remote control

Control panel

(9)

(10)

(11)

(1)

(8)

(7)

(2)

(3)

(6)

(4)

(5)

Name

: Main Function

(1) ENTER button

: Accepts the selected mode.

(2) MENU button

: Displays menus.

(3) SET UP button

: Sets up image and mode.

(4) ON/STANDBY button

: Turns the power on/off (standby).

(5) ON indicator

: Displays whether power is on or off.

(6) INPUT button

: Selects input.

(7) RETURN button

: Goes back one screen.

(8) Selection button

: Menu selections and adjustments,etc.

(9) LAMP indicator

: Displays lamp mode.

(10) TEMP indicator

: Lights when internal temperature is too high.

(11) FAN indicator

: Displays cooling fan mode.

(12) FREEZE button

: Pauses image.

(13) MUTE button

: Cuts off the picture temporarily.

Note

• For the remainder of this manual, buttons are referred to as follows:

Selection buttons ⇒

; ENTER button ⇒

Remote Control

Remote control

transmitter

(4)

(3)

(6)

(2)

(12)

(13)

(1)

(8)

(7)

p.28

p.25

p.21

p.23

p.29

p.22

p.36

p.27

English

Français

Español

Parts on the rear panel

(1)

(2)

(3)

(4)

(10)

Name

: Main Function

(1) Infrared remote sensor

: Senses commands from the remote control.

(2) CONTROL terminal

: When operating the projector via a computer, connect

this to the controlling computer's RS-232C port.

(3) S-VIDEO terminal

: Input S video signals from video equipment.

(4) VIDEO terminal

: Input video signals from video equipment.

(5) Component video terminal

: Input component video signal (Y/P

equipment or other source.

(6) COMPUTER terminal

: Input RGB signal from a computer or other source.

(7) DVI-D terminal

: Input digital RGB signal from a computer or other

source.

(8) Main power switch

: AC power line ON (standby)/OFF.

(9) AC IN socket

: Connect the supplied power cord here.

(10) Antitheft lock hole

: Attach a safety cable or any other antitheft device.

Notes

• Although this owner's manual abbreviates component video signals as Y/P

product also supports signals from video equipment marked "Y/C

• Input signal specifications for the DVI terminal complies with the DVI 1.0 Specifications.

• Please note that the operations for the functions not covered in these specifications are

not guaranteed. Because this is an evolving technology, it is possible that some devices

may not operate properly with the projector.

• This supports HDCP (High-bandwidth Digital Content Protection).

Deutsch

Italiano

Português Svenska

(7)

(5)

(6)

(9)

(8)

p.18

) from a video

, the

p.43