Toshiba TDP-MT500 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Toshiba TDP-MT500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-MT500 40 페이지. Home projector
Toshiba TDP-MT500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (42 페이지)

Toshiba TDP-MT500 소유자 매뉴얼

Using the remote control

Name and function of operational parts of the remote control
POWER button:
23
19
MEMORY (1, 2, 3) buttons:
Calls the pre-stored values in the
picture adjustment menu when
pressed.
MENU button:
26
Displays menu.
Erases the menu when pressed again.
Picture quality adjusting
button: (See below)
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting button is pressed, the screen for adjusting the
picture quality appears. Then, adjust the picture quality by pressing the % and $ buttons. The picture quality
adjustment can also be made in the PICTURE menu or the PROFESSIONAL-PICTURE menu. (See Page 27.)
The following picture quality features are displayed on the menu screen:
CONTRAST ......... Adjusts the contrast of projected picture images. Every time you press the % button, the pro-
jected image becomes brighter and more vivid. Every time you press the $ button, the pro-
jected image becomes darker and less vivid.
BRIGHT ................ Adjusts the brightness of projected picture images. Every time you press the % button, the
projected image becomes brighter. Every time you press the $ button, the projected image
becomes darker.
COLOR ................ Adjust the color thickness of projected picture image. Every time you press the % button is
pressed, the projected image color becomes thicker. Every time you press the $ button is
pressed, the projected image color becomes thinner.
TINT ..................... Adjusts the tint of projected picture images. Every time you press the % button, the skin color of
the projected image becomes more reddish. Every time you press the $ button, the skin color
of the projected image becomes greenish.
COLOR TEMP ..... Selects one of the preset color temperatures.
GAMMA ................ Selects one of the preset gamma corrections.
SHARPNESS ....... Adjusts the sharpness of projected picture images. Every time you press the % button, the
projected picture image becomes sharper. Every time you press the $ button, the projected
picture image becomes softer.
POWER ON/STANDBY
SOURCE
DVI
C1
C2
D
COMP1
COMP2
DVI-D
DVI
S
V
A
S-VIDEO
VIDEO
DVI-A
16:9
4:3
ZM
4:3
16:9
ZOOM
REAL
DYN
REAL
DYNAMIC
ASPECT
29
2
3
1
ENTER
MENU
EXIT
CNT
BRI
COL
TIN
CONTRAST BRIGHT
COLOR
TINT
TEM
GAM
SH
COLOR
GAMMA SHARPNESS
TEMP
LIGHT
LIGHT
PREPARING YOUR PROJECTOR
SOURCE button:
19
23
Selects an input video signal to be
projected.
ASPECT button:
21
Selects size of the video image according to
the video signal to be projected.
26
ENTER button:
Used to determine menu item. Enters a new item.
Directional button:
26
Used to shift menu item and adjust values.
26
EXIT button:
Displays the menu in one-level higher
hierarchy when pressed.
LIGHT button:
Switches between LIGHT modes of remote control every time it
is pressed.
If the remote control button lights up when the LIGHT button is
pressed, the dark-room mode is brought into ON. If it does not
light up, the normal mode is ON.
Dark room mode : All the buttons on the remote controller light
up if any of the buttons are pressed.
Normal mode
: None of the buttons light up (Except for
LIGHT button).
• The light automatically comes off a while after the remote
control button is released.
13