Toshiba TDP-MT700 소유자 매뉴얼 - 페이지 24

{카테고리_이름} Toshiba TDP-MT700에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-MT700 34 페이지. Home theater projector
Toshiba TDP-MT700에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 서비스 매뉴얼 (49 페이지)

페이지 인쇄

7. To adjust the position of the PIP window, press the ARROW buttons ( / / / ).

8. To turn off the PIP or POP function, select PIP Off or POP Off.

PIP ---

POP ---

If the selected input signal is not availble, the image will be black.

Pausing the picture

To pause the picture, press the FREEZE button on the remote control. Pressing the Freeze button

again cancels the Freeze button.

The icon

Even if an image is frozen on the screen, the pictures are running on the video or other device. If

the connected devices contain audio output function and it is activated, you can still hear the

sound on-going.

If you are using this function on commercial video software or on a broadcast or cable broadcast

except for the purpose of your private viewing and listening, it may infringe the copyright protected

by the copyright laws.

Turning the power off

Follow the steps below.

Press the ON/STANDBY button on the projector or remote

control and a warning message appears. To turn the projector

off, press ON/STANDBY again.

The Power indicator light flashes green and the fans run for

about two minutes to cool the lamp. The projector will not

respond to any commands until the cooling process is com-

plete.

Then, the Power indicator light is a steady orange once the

cooling process has finished and fans stop.

If the projector will not be used for an extended period, turn the

main power switch off and unplug the power cord from the

power outlet.

If you accidentally press the ON/STANDBY button and do not

want to turn off the power, wait until the confirmation message

disappears.

Using the projector and remote control

will appear while Freeze is in effect.