Toshiba TDP-MT700 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Toshiba TDP-MT700에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-MT700 36 페이지. Home theater projector
Toshiba TDP-MT700에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 서비스 매뉴얼 (49 페이지)

Toshiba TDP-MT700 소유자 매뉴얼
If the remote control stops working, or if its effective range decreases, replace the batteries
with new ones.
The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
If you press a button for a function that is not available, the icon
when the button press is not effective.
1
2
3
4
5
6
MENU
7
8
8.
PIP and POP buttons
To turn the PIP or POP function on or off, press the PIP or POP button. Adjust the size of the PIP
image by pressing the + or - button. To switch between the two windows, repeatedly press SWAP to
adjust the image settings in the selected window.
9.
FREEZE
Pauses the image.
10. LIGHT
Turns on the remote control's backlight.
14
Overview
1.
ON/STANDBY
Press and hold this button to turn the projector on when it is in the
standby mode. Or press this button twice to turn the projector off.
2.
Selects an input source to display on the projector.
3.
Selects the image aspect ratio according to the input signal.
4.
Restores settings saved in memory locations 1, 2, and 3, or
restores the default modes for the current input source (Dynamic,
Standard, Theater 1, or Theater 2).
5.
Used to select the desired menu or to make adjustments.
9
+
Opens the selected items of the menu.
-
6.
Turns the on-screen display control menu on or return to upper
10
level.
7.
p.23
p.26
p. 20
INPUT buttons
p. 20
SCREEN SIZE buttons
PICTURE MODE selection buttons
Arrows ( / / / )
Enter button
p.26
MENU
p.26
Picture quality adjustment buttons
will appear on the screen
,
,
p. 24
p. 33
p.27
p.23
p.26
p.26