Toshiba TDP-MT700 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Toshiba TDP-MT700에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-MT700 36 페이지. Home theater projector
Toshiba TDP-MT700에 대해서도 마찬가지입니다: 소유자 매뉴얼 (34 페이지), 서비스 매뉴얼 (49 페이지)
페이지 인쇄
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration
Use a 5A fuse approved by ASTA or BSI to
BSI362.
Always replace the fuse cover after
changing the fuse.
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to ship your
projector. For maximum protection, repack the set as it was originally packed at the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location. When the
unit is exposed to such a change in temperature, moisture may condense on the crucial internal
parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours after there is
an extreme or sudden change in temperature.
Location and Installation
• Do not place in hot locations, such as near a heater. Doing so could cause malfunction and shorten
the life of the projector.
• Avoid locations with oil or cigarette smoke, which can affect the quality and useful life of the
product's optical parts and darken the screen.
• Do not use the product vertically in any upright position or slantwise at an angle of 20 degrees or
more.
• Using this product near a TV or radio may cause interference in the image or sound. If this
happens, move it away from the TV or radio.
• In a high-altitude location where the air is thin, cooling efficiency is reduced; therefore, use the
projector in a cool area.
6
POWER SUPPLY CORD SELECTION
Plug type
Line
voltage
EURO
220 - 240V
UK
220 - 240V
Plug
configuration
Plug type
Line
voltage
Australian
200 - 240V
240V
10A
Switzerland
200 - 240V
240V
6A
North
200 - 240V
American
240V
10A