Toshiba TDP-P75 소유자 매뉴얼 - 페이지 23
{카테고리_이름} Toshiba TDP-P75에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-P75 45 페이지. 2,300 ansi-lumens contrast 2,000 : 1 ddr dmd technology
Toshiba TDP-P75에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
English
• If the projector is ceiling-mounted, install the breaker for turning off the power in
case of anomaly. Let everyone involved with the use of the projector know that
fact.
Projection distance and size
Use the figures, tables, and formulas below to determine the projection size and
projection distance.
(Projection sizes are approximate values for full-size picture with no keystone
adjustment.)
Screen
90 °
H
90 °
a is the distance (m) between the
lens and the screen, and
corresponds to a range of 1.15 m to
10.00 m. H is the height from the
image bottom to the center of the
lens.
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all of the equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure that the cables are firmly inserted.
In the connections shown below, cables are not included with the projector (see
). Cables are commercially available from electronics stores.
p.15
As seen from above
As seen from the side
Lens center
a
projection size (inches)
a (min length) =
projection size (inches)
a (max length) =
projection size
projection distance a (m)
(inches)
min length
(zooming
max)
30
1.00
36
1.20
40
1.33
60
2.00
80
2.66
100
3.33
150
5.00
200
6.66
250
8.33
300
9.99
30.03
24.69
height
(H) (cm)
max length
(zooming
min)
1.22
7.54
1.47
9.05
1.63
10.06
2.44
15.09
3.26
20.12
4.07
25.15
6.11
37.72
8.14
50.29
10.18
62.87
---
75.44
Overview
23