Toshiba TDP-P8 사용자 설명서 - 페이지 34

{카테고리_이름} Toshiba TDP-P8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-P8 42 페이지. User manual
Toshiba TDP-P8에 대해서도 마찬가지입니다: 사양 (2 페이지)

Appendices

If you experience trouble with the projector, refer to the

following information. If the problem persists, please

contact your local reseller or service center.

Problem : No image appears on screen.

Ensure all the cables and power connections are correctly and



securely connected as described in the "Installation" section.

Ensure the pins of connectors are not crooked or broken.



Check if the projection lamp has been securely installed. Please



refer to the "Replacing the lamp" section.

Make sure you have removed the lens cap and the projector is



switched on.

Problem : Partial, scrolling or incorrectly displayed image.

Press "PJ Mode" on the Remote Control or press "AUTO SET" on



the Control Panel.

If you are using a PC:



For Windows 3.x:

1. In the Windows Program Manager, double click the "Windows

Setup" icon in the Main group.

2. Verify that your display resolution setting is less than or equal to

1280 x 1024.

For Windows 95, 98, 2000, XP:

1. From the "My Computer" icon, open the "Control Panel" folder,

and double click the "Display" icon.

2. Select the "Settings" tab

3. Click on the "Advanced Properties" button.

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer

to the following steps.