Toshiba TDP-S8UC01 소유자 매뉴얼 - 페이지 36

{카테고리_이름} Toshiba TDP-S8UC01에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-S8UC01 45 페이지. Data projector

Lamp replacement (Continued)

Unplug power cord.

Wait until lamp is sufﬁciently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the two screws, raise the outer lamp

cover with your ﬁngers as shown to remove

the outer lamp cover. Use care to avoid any

damage to nails and/or tip of your ﬁnger(s). If

you have any difﬁculty in removal, you can use

a screwdriver or any other smaller tool for your

convenience.

Pull out the lamp.

Loosen the two lamp locking screws, pull up the

handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down the new lamp

until the bottom is reached, and lock in place using

the two lamp locking screws.

Replace the lamp cover.

Align the cover,and press it in,then tighten the

screws loosend in step

no longer loose.

until the lamp cover is

Lamp cover