Toshiba TDP-S8UC02 소유자 매뉴얼 - 페이지 24

{카테고리_이름} Toshiba TDP-S8UC02에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-S8UC02 45 페이지. Data projector

■ Turning the power off

Press the ON/STANDBY button.

A message appears on the screen, conﬁrming that you wish to shut off the power. This

message will disappear after a moment. (This operation is no longer valid after the

message disappears.)

Press the ON/STANDBY button again.

The screen turns off, but the internal cooling fan continues to operate for a short. Then

, the projector goes into standby mode.

During cooling ,the POWER indicator ﬂashes.In this state,the power cannot be

turned back on.

If you are in a hurry, there is no problem with unplugging the power cord or turn-

ing off the main power switch in this state.

In standby mode

Note

• The projector consumes about 15W of power in standby. We recommend that you unplug

the power cord if you will not be using the projector for an extended period.

PRECAUTION

• If the power cord is unplugged before cooling is complete, give the lamp time (about 5

minutes) to cool before plugging it back in.

When cooling lamp

POWER

FLASH

After cooling complete

POWER