Toshiba TDP-SP1 소유자 매뉴얼 - 페이지 25
{카테고리_이름} Toshiba TDP-SP1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-SP1 46 페이지. Tdp-sp1u user's guide
■ Turning the power off
1
Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. To
shut off the power, press the ON/STANDBY button again. If you do not wish to shut off
the power, wait for a while without conducting any operations. The message will disap-
pear shortly. (This operation is no longer valid after the message disappears.)
2
Press the ON/STANDBY button again.
The screen turns off, but the internal cooling fan continues to operate for a short while.
Then, the projector goes into standby mode.
During cooling ,the ON/STANDBY indicator flashes. In this state, the power can-
A
not be turned back on.
However, there is no problem with unplugging the power cord in this state.
In standby mode
B
Note
• The projector consumes about 6W of power in standby. We recommend that you unplug
the power cord if you will not be using the projector for an extended period.
Precaution
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
When cooling lamp
FLASH
A
After cooling complete
B
25