Toshiba TDP-SP1 소유자 매뉴얼 - 페이지 38

{카테고리_이름} Toshiba TDP-SP1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-SP1 46 페이지. Tdp-sp1u user's guide

Lamp replacement (Continued)

Mount the new lamp.

Align the orientation, press down the new lamp

until the bottom is reached, and lock in place using

the two lamp locking screws.

Replace the lamp cover.

Align the cover and press it in. Then replace the

screws you removed in step

until the lamp cover is no longer loose. (Be sure to

replace the lamp cover.)

Reset the lamp time.

See the lamp's manual for instructions on resetting

the lamp time.

Notes and Precautions

• The [Lamp time] item in the Status display menu indicates the time of lamp use (as a

rough guide).

p.35

• It is recommended that the lamp be replaced after 3,500 hours of use.When [Lamp

time] reaches 3,500 hours, a message will appear. (After 3,500 hours, the message will

appear when the power is first turned on after each 100 hour period of use.) This display

disappears when you press the

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

projector may fail to be powered on or the lamp may fail to come on.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic mer-

cury. Be careful not to break used lamps, and dispose of them in accordance with local

regulations.

, and tighten them

button.