Toshiba TDP-T360 소유자 매뉴얼 - 페이지 26

{카테고리_이름} Toshiba TDP-T360에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-T360 29 페이지. User manual
Toshiba TDP-T360에 대해서도 마찬가지입니다: 소유자 매뉴얼 (29 페이지)

Toshiba TDP-T360 소유자 매뉴얼
Troubleshooting
If you think something is wrong, check the followings before contacting customer service.
Please see "Trouble indications"
p.49
as well.
If This Happens
No power
Is the power cord plugged in? Is it connected to the projector?
Is the main power switch turned on?
Is the outer lamp cover attached properly?
Power goes out
Is the ambient temperature high?
during use
Is the air intake or air exhaust blocked?
No picture
Is the input source selected correctly? (When [Auto input search]
is [Off])
p.41
Is the mute function on?
Is the brightness setting minimized?
Are the connections set up correctly?
Are all the connected devices functioning properly?
No audio
Is the mute function on?
Is the volume setting minimized?
Are the connections set up correctly?
Are all the connected devices functioning properly?
Picture not
Is the input signal supported by the projector?
displayed
Is there something generating an abnormal video signal, for
correctly
instance the video tape?
Picture blurred
Is the lens dirty?
Part of picture
Is the lens focus adjusted optimally?
out of focus
Is the projection distance within the projector's supported range?
p.21
Is the projector's screen placement angle tilted too far?
Are the sharpness or sampling phase adjustments off?
Image is dark
Are the brightness or contrast adjustments off?
Is the lamp nearing the end of its service life?
Colors too light
Are the color, tint, R-level, G-level, or B-level adjustments off?
Bad shading
Is the screen dirty?
Is the blackboard mode set properly?
Is the lamp nearing the end of its service life?
Control panel key
Is the key lock function on?
doesn't work
Check
p.24
p.46
p.49
p.49
p.32
p.36
p.22 p.23
p.32
p.27
p.22 p.23
p.53 p.54
p.48
p.27
p.21
p.36 p.37
p.36
p.43
p.41
p.43
p.43
50
If This Happens
Remote control
doesn't work
p.36
Check
Is the remote control code identical with the projector's code?
Are the remote control's batteries drained?
Are the batteries inserted into the remote control correctly?
Is the remote control being used within the effective range?
Are there any obstructions between the remote control and
projector?
Are there any fl uorescent or other bright lights shining at the
projector's infrared remote sensor?
51
p.42
p.19
p.19