Toshiba TDP-TW90A 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Toshiba TDP-TW90A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-TW90A 37 페이지. Xga / with pc card slot
Toshiba TDP-TW90A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지)

페이지 인쇄

Names of each part on the control panel and remote control

Control panel

(9)

(10)

(11)

(1)

(8)

(7)

(2)

(3)

(6)

(4)

(5)

Name

: Main Function

(1) ENTER button

: Accepts the selected mode.

(2) MENU button

: Displays menus.

(3) SET UP button

: Sets up image and mode.

(4) ON/STANDBY button

: Turns the power on/off (standby).

(5) ON indicator

: Displays whether power is on or off.

(6) INPUT button

: Selects input.

(7) RETURN button

: Goes back one screen.

(8) Selection button

: Menu selections and adjustments,etc.

(9) LAMP indicator

: Displays lamp mode.

(10) TEMP indicator

: Lights when internal temperature is too high.

(11) FAN indicator

: Displays cooling fan mode.

(12) FREEZE button

: Pauses image.

(13) MUTE button

: Cuts off the picture and sound temporarily.

(14) Numeric keypad

: Use to set up the wireless LAN. Numbers and charac-

ters can be entered.

Notes

• For the remainder of this manual, buttons are referred to as follows:

Selection buttons ⇒

; ENTER button ⇒

• For further information of the mouse remote control, see the Owner's Manual of the

Mouse Remote Control.

Remote Control

Remote control

transmitter

(4)

(6)

(3)

(14)

(2)

(8)

(13)

(12)

(7)

(1)

p.29

p.26

p.22

p.24

p.30

p.23

p.65

p.28

p.37

Parts on the rear panel

(20)

Name

: Main Function

(1) Infrared remote sensor

: Senses commands from the remote control.

(2) CONTROL terminal

: When operating the projector via a computer, connect

this to the controlling computer's RS-232C port.

(3) CARD indicator

: Displays PC card's status.

(4) UNMOUNT button

: Press before removing PC card.

(5) RESET switch (inside depression) : Press if CARD indicator turns red.

(6) Eject button

: Press to remove PC card.

(7) PC card slot

: Insert PC cards here.

(8) AUDIO OUT terminal

: Outputs audio signals.

(9) MONITOR terminal

: Connect to a computer display, etc.

(10) COMPUTER 2 terminal

: Input RGB signal from a computer or other source, or a

component video signal (Y/P

(11) Main power switch

: AC power line ON (standby)/OFF.

(12) AC IN socket

: Connect the supplied power cord here.

(13) AUDIO IN terminal

: Input audio signals from a computer or video equipment

with a component video signal output terminal.

(14) COMPUTER 1 terminal

: Input RGB signal from a computer or other source, or a

component video signal (Y/P

(15) S-VIDEO terminal

: Input S video signals from video equipment.

(16) AUDIO (L/R) terminal

: Input audio signals from video equipment.

(17) VIDEO terminal

: Input video signals from video equipment.

(18) AUDIO (L/R) terminal

: Input audio signals from video equipment.

(19) USB terminal

: Provided for servicing purposes only. Do not use for

any connection.

(20) Antitheft lock hole

: Attach a safety cable or any other antitheft device.

Note

• Although this owner's manual abbreviates component video signals as Y/P

product also supports signals from video equipment marked "Y/C

(8)

(9)

(10)

(13)

(12)(11)

p.18

p.71

p.21

) from video equipment.

, the