Toshiba TDP-TW95 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Toshiba TDP-TW95에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-TW95 46 페이지. Usb reader, wireless lan, power zoom, auto focus
Toshiba TDP-TW95에 대해서도 마찬가지입니다: 사양 (2 페이지)
Names of the terminals on the rear panel
(1)
(2)
(3)
(4)
(8)
(9)
Name
: Main Function
(1) CONTROL terminal
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
(2) MONITOR terminal
: Connect to a computer display, etc.
(3) AUDIO IN terminal
: Input audio signals from a computer, or from video
equipment with a component video signal output
terminal.
(4) COMPUTER 1 IN terminal
: Input RGB signal from a computer or other source, or a
component video signal (Y/P
equipment.
(5) AUDIO (L/R) terminal
: Input audio signals from video equipment.
(6) S-VIDEO terminal
: Input S video signals from video equipment.
(7) USB terminal
: Connects the supplied wireless LAN USB adapter or a
commercial USB memory.
(8) AUDIO OUT terminal
: Outputs audio signals.
(9) COMPUTER 2 IN terminal
: Input analog RGB signal from a computer or other
source, or a component video signal (Y/P
video equipment.
(10) AUDIO (L/R) terminal
: Input audio signals from video equipment.
(11) VIDEO terminal
: Input video signals from video equipment.
(5)
(6) (7)
(10)
(11)
/P
) from video
B
R
p.45
/P
) from
B
R
18
Preparing and using the remote control
■ Loading dry-cell batteries
into the remote control
q Remove the battery cover.
w Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
p.89
Two batteries (LR03, SIZE AAA) are
used.
e Replace the battery cover.
Dry-cell batteries
• Before using the batteries, be sure to observe the Safety Precautions described in
previous pages.
• Remove batteries from remote control when not using for extended periods.
• If the remote control stops working, or if its range decreases, replace all the batteries with
new ones.
The remote control
• Turn off the ON/OFF switch of the remote control when not in use or to store in baggage.
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Do not drop or bang.
• Do not leave in hot or humid locations.
• Do not get wet or place on top of wet objects.
• Do not take apart.
• In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
■ Operating the remote
control
Turn on the ON/OFF switch of the
remote control.
Point toward the projector's
infrared remote sensor, and press a
button on the remote control.
• Operating the projector from the front
Approx. 15°
When operating the remote control
from behind the projector, the laser
light is reflected on the projecting
surface and may travel a shorter
distance to reach the projector
depending on the shape and material
of the projecting surface.
19