Toshiba TDP-WX5400U 소유자 매뉴얼 - 페이지 41

{카테고리_이름} Toshiba TDP-WX5400U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-WX5400U 42 페이지. Toshiba tdp-wx5400: user guide
Toshiba TDP-WX5400U에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄
Toshiba TDP-WX5400U 소유자 매뉴얼
Specifications (Continued)
Pin assignment of COMPUTER 1 IN
11
15
Pin No.
6
10
1
5
Mini D sub 15 Pin connector
10
11
12
13
14
15

Screen Trigger

When the projector is powered ON, the screen trigger output sends a low voltage trigger to
the screen controller and the screen will go down. When the projector is powered OFF, the
screen trigger stops sending a low voltage trigger to the screen controller and the screen
will go up.
Note
•
To use this feature, you must turn on the Screen Trigger function
Note
•
Screen controllers are supplied and supported by screen manufacturers.
•
Do not use this jack for anything other than intended use. Connecting the wired remote
control to the SC. TRIGGER Mini Jack causes damage to the remote control.
Pin description
RGB Signal (analog)
Y/Cb/Cr Signal
1
Red
Cr
2
Green or Sync on Green
Y
3
Blue
Cb
4
Ground
5
Ground
6
Red Ground
Cr Ground
7
Green Ground
Y Ground
8
Blue Ground
Cb Ground
9
No Connection
Sync Signal Ground
No Connection
Bi-directional Data (SDA)
Horizontal Sync or Composite
Sync
Vertical Sync
Data Clock
.
p.58
80