Toshiba TDP-XP1U - XGA DLP Projector 소유자 매뉴얼 - 페이지 25
{카테고리_이름} Toshiba TDP-XP1U - XGA DLP Projector에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-XP1U - XGA DLP Projector 48 페이지. Tdp-xp1u user's guide
페이지 인쇄
■ Turning the power off
1
Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. To
shut off the power, press the ON/STANDBY button again. If you do not wish to shut off
the power, wait for a while without conducting any operations. The message will disap-
pear shortly. (This operation is no longer valid after the message disappears.)
2
Press the ON/STANDBY button again.
The screen turns off, but the internal cooling fan continues to operate for a short while.
Then, the projector goes into standby mode.
During cooling ,the ON/STANDBY indicator flashes. In this state, the power can-
A
not be turned back on.
However, there is no problem with unplugging the power cord in this state.
In standby mode
B
Note
• The projector consumes about 6W of power in standby. We recommend that you unplug
the power cord if you will not be using the projector for an extended period.
Precaution
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
• Right after turning off the power, the unit may become very hot, especially air exhaust
and the bottom of the unit. Please handle with care to avoid burn injuries.
When cooling lamp
FLASH
A
After cooling complete
B
25