Toshiba TDP490 매뉴얼 - 페이지 13

{카테고리_이름} Toshiba TDP490에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP490 40 페이지.

Cable

When you are connected to a cable system you have

two options. If you have a cable decoder you set your

TV to the channel for the cable, and then you use the

remote control for the decoder to switch between

channels. If you do not have a decoder you simply set

your TV up just like you would with an antenna. This is

also the same with the TOSHIBA TDP490. You must

scroll the channel name in the TV Setup menu until you

find the correct channel for your cable system. When

this channel has been assigned to one of the program

numbers you simply select this program and use the

remote control or control panel to switch between

channels.

Satellite

This works like the cable decoder meaning that you

select the channel that reads the signals from the

atellite dish. Then you use the remote control of the

decoder to switch between channels.

Remark

The optional tuner may not be available depend on the

broadcasting system. Please contact with your dealer.

Contents