Philips FW-C10 사용자 설명서 - 페이지 18
{카테고리_이름} Philips FW-C10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips FW-C10 22 페이지. 3 cd changer mini system
Philips FW-C10에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (28 페이지), 매뉴얼 (28 페이지), 매뉴얼 (22 페이지)
페이지 인쇄
RECORDING
5 Press STOP•OPEN on tape deck 1 and
tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to start
recording.
™ The
starts flashing.
REC
4 Press PAUSE to interrupt recording.
5 Press STOP•OPEN on tape deck 1 to
stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
18
pg 01-22/C10/22-Eng
18
CLOCK
FW-
C10
MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3
BAND
CD
TUNER
TUNING
SEARCH
STOP• CLEAR
DIGITAL
DSC
SOUND
PROGRAM
CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about seven
seconds.
• Press CLOCK•TIMER briefly.
or 22:38" (the current
™ "10:38
PM
time) will be displayed depending on
whether you have selected 12- or 24-
hour mode.
™ "--:--" will be displayed if the
clock is not set.
3/7/00, 5:05 PM
•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
TAPE 1 • 2
VIDEO
MASTER
VOLUME
TAPE
AUX
PRESET
PLAY• PAUSE PREV
NEXT
DIM
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "12:00
" or
AM
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK•TIMER to select clock
mode.
2 Press PROGRAM to select 12- and 24-
hour mode.
™ If 12-hour mode is selected,
"12:00" starts flashing and the
AM
lights up.
™ If 24-hour mode is selected,
"00:00" starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
5 Press CLOCK•TIMER again to store the
setting.
3139 116 19311