Toshiba TLF-XD2000 소유자 매뉴얼 - 페이지 21
{카테고리_이름} Toshiba TLF-XD2000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLF-XD2000 28 페이지. 3lcd data projector
페이지 인쇄
Using the menus (Continued)
■ The default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
Item
No signal
Set the time to wait for the power to be turned off after the last
power off
operation is made with no input signal.
Auto input
Set whether the input with signals is only selected or not.
search
Beep
Beep when operation is made.
Sets whether to turn on the power when the ON/STANDBY button is
Power on
pressed (Manual), or when the power cord is plugged in (Auto).
Sets the lamp power.
Lamp power
Detailed description
[Auto input search]
[On]: Automatically searches the signals that
can be projected, and switches input
from the connected device that outputs
the video signals each time the INPUT
button is pressed. The input from the
connected device that outputs no video
signals is skipped.
[Off]: Displays the Input select menu.
Toggle with
buttons and press
button. (The input without signals can be
selected.)
[Power on]
Note that if [Power on] is set to [Auto], then if the power is supplied when restored
after a power outage, the projector will come on.
[Lamp power]
When [Lamp power] is set to [Low], the screen becomes a little darker, but the
cooling fan noise gets quieter.
Description
Off (not turned off)
30 min.
On
On
Manual
Low
Standard
Input select menu
Input select
Computer 1
Y/P
/P
1
B
R
Computer 2
Y/P
/P
2
B
R
Video
S-video
/
shows whether signal is
input or not.
40
Default setting 2 menu
Item
Projection
mode
Fan mode
Key lock
Off
Reset all
Off
Password
Auto
Detailed description
[Fan mode]
Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan
noise gets louder.) Set this option to use the projector, for example, at high altitude
(over 1,500 meters above sea level).
• Do not set Fan mode to [High] when using the projector at a lower altitude.
[Key lock]
Protect from operating errors by locking on the control panel buttons of the
projector. (The remote control operations are available.)
Control panel operations are locked after the setting is done, and accordingly
operation with the control panel buttons is disabled.
• To release the key lock, set the [Key Lock] to [Off] using remote control. Pressing
the [RETURN] button on the projector for 10 seconds also sets the [Key Lock] to
[Off]. (When operating the main unit, the 2 indicators of LAMP and TEMP light in
orange for 3 seconds, and at the same time the projector beeps.)
Description
Sets projection mode in accordance with Placement Style.
(Standard)
(Rear)
Sets the cooling fan speed.
Lock the control panel buttons.
[
or
: Enter setting mode]
[
[
:Confirm]
[
:Select OK to end]
Press [Cancel] to return.
Press
. (The password and user logo are not reset.)
Resets all adjustments and settings to their factory settings.
Password setting
p.31
41
p.20
(Ceiling)
(Rear ceiling)
Standard
High
: Select On/Off]
Yes
No