Toshiba TLP-551 서비스 매뉴얼 - 페이지 26

{카테고리_이름} Toshiba TLP-551에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-551 44 페이지. 3lcd data projector

(2) Press [Yes] button.

(3) Input file name and press [Open] button.

1-4 Set the shading data to the projector

(1) Select [set] from [Projector] menu.

(2) Select commucation port and press [Go] button.

(3) If you save data to the projector press [Yes] button.

2. When LCD Panels are exchanged.

Step1. Adjust the VCOM data (front and celing) .

This adjustment makes the flicker of a panel into

the minimum.

Step2. Adjust the Shading data.

Step3. Set the new data to the Projector.

2-1 Adjust the VCOM data

(1) Select [Built in Signal] from [Check] menu.

This menu can output the signal pattern built

in the projector.

(2) Set the color level and press [OK] button

(When you adjust Red VCOM, set red level 100%.)

After setting press [Close] button.

(3) Select [Vcom] from [Check] menu.

1-25