Toshiba TLP-MT3 소유자 매뉴얼 - 페이지 27
{카테고리_이름} Toshiba TLP-MT3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-MT3 43 페이지. Lcd projector
Toshiba TLP-MT3에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
Adjustments
Projection adjustments
– Image
Preparation
• Display the image as explained in "Picture
Projection".
19
SELECT/ADJUST
ON/STANDBY
MENU
ENTER
ON/
STANDBY
CALL
RGB
VIDEO
1,7
AUTO SET
KEYSTONE RESIZE
FREEZE
MUTE
MARKER
MENU
ENTER
-
+
RESET
RESET
1
Press MENU to display the
menu.
2
Press
or
to select
ON
INPUT
LAMP
TEMP
3
Press
4
Press ENTER.
The image is automatically adjusted.
2,3,5,6
For further adjustments, follow the below
steps.
AUTO SET
4
5
Press
preferred item.
6
Press
item.
To select another item, go back to step 5.
Phase:
H-position: To shift the image to the
V-position: To shift the image down (–),
.
Clock
7
Press MENU.
The menu disappears.
I ma g e
A u t o s y n
c .
P h a s e
–
+
H – p o s i t i o n
–
+
V – p o s i t i o n
–
+
C l o c k
–
+
to select "Auto sync."
or
to select a
or
to adjust the
To reduce flickers.
left (–), to the right (+).
to up (+).
To remove vertical stripes.
Notes
• When performing the automatic projection
adjustment, use a bright and distinctly edged
picture.
• Pressing AUTO SET on the remote control
can also adjust the image automatically.
• If you project an image from a computer with
an LCD screen while monitoring the image on
the computer, the image may not be projected
properly, depending on the computer model.
In this case, turn off the computer display, or
make the necessary picture adjustments on
the projector. For details on controlling the
computer display, etc., refer to the computer's
manual and description on the software for
the computer used.
• During adjustments of "H-position" or "V-
position", the image may not be projected
properly.
• While using, an aberration of the phase may
occur. In that case, adjust "Phase" again.
• Some item may be displayed in gray
depending on an input source. The item
displayed in gray cannot be adjusted and/or
set.
• These adjustments are stored until you turn
the power off.
• To store the adjustments even if the power is
turned off, follow the procedure of "Saving
data".
30
• Pressing RESET will return the adjustment or
setting currently selected to default.
27
21