Toshiba TLP-S10 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Toshiba TLP-S10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-S10 22 페이지. 1,200 ansi-lumens 2.1 kg eco mode
Toshiba TLP-S10에 대해서도 마찬가지입니다: 소유자 매뉴얼 (22 페이지), 사양 (2 페이지), 서비스 매뉴얼 (33 페이지)

Toshiba TLP-S10 소유자 매뉴얼

Using handy features

I Using auto setting (Auto setting)
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.
1
Press the AUTO SET button.
The Auto setting menu appears.
2
Press the AUTO SET button again.
The menu item is automatically adjusted/set.
For computer input, the
icon will appear during
processing.
Note
• Auto adjustment/setting may not be performed correctly for input signals other than
those supported by the projector
p.38
G Manual adjustment and setting
The menu items vary depending on the input type, as shown in the table below.
Use the
buttons to adjust the items in the table below, then press
the
button when you are finished. The menu disappears. (The CANCEL button
on the remote control also allows you to exit the menu mode.)
Input
Item
Computer
Phase
Adjust with
Frequency
Adjust with
flickering when many vertical lines appear on the screen.
H-position
Move left
V-position
Move up
Clamp 1
Adjusts the clamp pulse position with
Clamp 2
Adjusts the clamp pulse width with
Y/P
/P
Phase
Adjust with
B
R
Signal format [
of the following]
480i(525i)@60Hz/480p(525p)@60Hz/
576i(625i)@50Hz/576p(625p)@50Hz/
720p(750p)@60Hz/720p(750p)@50Hz/
1080i(1125i)@60Hz/1080i(1125i)@50Hz/
1035i(1125i)@60Hz/1152i(1250i)@50Hz
Video
Video mode
[
S-video
of the followings]
NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43
Note
• Moving pictures generated with the DVD software for computers may appear
unnatural if it is projected with this projector, but it is not a malfunction.
Remote
Control panel
Control
FAN TEMP LAMP
ON
CALL
INPUT
ON / STANDBY
KEYSTONE
ZOOM
+
MUTE
MENU
-
+
VOL.
VOL.
CANCEL
KEYSTONE
AUTO SET
-
ZOOM
,
p.39
.
Description
to eliminate flicker.
to eliminate periodic patterns and
Move right
Move down
or
or
to eliminate flicker.
: Enter to setting mode]
[
: Select one
[Apply:
]
: Enter to setting mode]
[
: Select one
[Apply:
]
24
I Correcting the keystone distortion (Keystone)
When the foot adjuster
projection angle, the picture will undergo keystone (trap-
ezoidal) distortion.
ON/
STANDBY
AUTOSET
This projector is capable of correcting this keystone distortion.
FREEZE
RESIZE
INPUT
1
Press the KEYSTONE button.
The Keystone menu appears.
2
Use the
On completing the adjustment, press the
CANCEL button on the remote control for menu dismissal). The trapezoidal distortion will be
automatically corrected. During the processing, the icon
Item
Keystone
Notes
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
• Keystone adjustment will not change the shape of the menus.
I Zooming out the images
This equipment is provided with the digital zoom (electric zoom: 100-80%). (Note that
.
the display, if digitally zoomed out, may suffer from some degradation.)
.
1
Press the ZOOM – button.
Each time the ZOOM – button is pressed, the
image is reduced in size.
2
Press the ZOOM + button to bring it back
to the original size.
Each time the ZOOM + button is pressed, the
image size increases.
(You cannot make it larger than the original size.)
p.23
is used to change the
Control panel
Before correction After correction
VOL.
buttons for keystone adjustment.
button to dismiss the menu (you can also use the
is displayed.
Description
Shrink button of the screen
Control panel
VOL.
• Pressing either the ZOOM-
• The adjustment value will
25
Remote
Control
FAN TEMP LAMP
ON
ON/
CALL
STANDBY
INPUT
ON / STANDBY
KEYSTONE
AUTOSET
+
ZOOM
MUTE
FREEZE
MENU
RESIZE
-
VOL.
+
CANCEL
KEYSTONE
AUTO SET
-
INPUT
ZOOM
Shrink top of the screen
Remote
Control
RESIZE
FAN TEMP LAMP
ON
INPUT
ON / STANDBY
CANCEL
+
ZOOM
INPUT
ZOOM
+
MENU
-
VOL.
+
-
+
VOL.
MENU
VOL.
KEYSTONE
AUTO SET
ZOOM
-
-
ZOOM
Notes
or ZOOM+ button would
display the
icon.
automatically be saved.