Epson V11H303020 - PowerLite 83+ XGA LCD Projector 사용자 설명서 - 페이지 17

{카테고리_이름} Epson V11H303020 - PowerLite 83+ XGA LCD Projector에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson V11H303020 - PowerLite 83+ XGA LCD Projector 42 페이지. User replaceable parts list
Epson V11H303020 - PowerLite 83+ XGA LCD Projector에 대해서도 마찬가지입니다: 운영 매뉴얼 (36 페이지), 빠른 설정 매뉴얼 (7 페이지), 운영 매뉴얼 (47 페이지), 적합성 선언 (4 페이지), 브로셔 (2 페이지), 사용자 설명서 (1 페이지), 부품 목록 (1 페이지)

페이지 인쇄
Epson V11H303020 - PowerLite 83+ XGA LCD Projector 사용자 설명서
Registering and deleting projectors for monitoring
Registration by specifying an IP address (Manual
registration)
Procedure
A
Right-click in Grouping view and select "New" - "Projector
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select "New" - "Projector (manual
registration)" from the Edit menu.
You can also carry out this operation by selecting New - Projector
(manual registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
If using a serial TCP/IP conversion adapter and cable to connect
the projector, select Use Serial TCP/IP conversion adaptor. Enter
the port number in Port Number and then click Search.
C
After searching is complete, enter the information for the
projector to be registered while referring to the table below.
Display name
Enter the name of the projector(s) to be displayed
in Grouping view or Detail list view. Up to a
maximum of 32 bytes can be entered. A space
cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Parent group
Select when registering a projector in a group. If
no groups have been created, this cannot be
selected.
s "Registering several projectors to a
monitoring group all at once"
Projector
This shows the name that has been registered on
name
the projector.
IP address
This shows the IP address that you entered in step
2.
Use Serial
Select this if using a serial TCP/IP conversion
TCP/IP
adapter to connect the projector.
conversion
adaptor.
17
p.18