MSI 919-98H2-001 매뉴얼 - 페이지 36

{카테고리_이름} MSI 919-98H2-001에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI 919-98H2-001 42 페이지. Qseven r 2.0 cpu module board

BIOS Setup

should be displayed on the screen to the serial COM port for display on the

terminal screen. Besides, all data received from the serial port is interpreted

as keystrokes from a local keyboard.

▶ Console Redirection Settings

▶ Terminal Type

To operate the system's console redirection, you need a terminal support-

ing ANSI terminal protocol and a RS-232 null modem cable connected be-

tween the host system and terminal(s). This setting specifies the type of

terminal device for console redirection.

▶ Bits per second, Data Bits, Parity, Stop Bits

This setting specifies the transfer rate (bits per second, data bits, parity,

stop bits) of Console Redirection.

▶ Flow Control

Flow control is the process of managing the rate of data transmission be-

tween two nodes. It's the process of adjusting the flow of data from one

device to another to ensure that the receiving device can handle all of the

incoming data. This is particularly important where the sending device is ca-

pable of sending data much faster than the receiving device can receive it.

▶ VT-UTF8 Combo Key Support

This setting enables/disables the VT-UTF8 combination key support for

ANSI/VT100 terminals.

▶ Recorder Mode, Resolution 100x31

These settings enable/disable the recorder mode and the resolution

100x31.

▶ Legacy OS Redirection Resolution

This setting specifies the redirection resolution of legacy OS.

3-14