MSI MAG Series 사용자 설명서 - 페이지 22

{카테고리_이름} MSI MAG Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI MAG Series 27 페이지. Oled monitor
MSI MAG Series에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (29 페이지), 사용자 설명서 (34 페이지), 사용자 설명서 (29 페이지), 사용자 설명서 (30 페이지), 사용자 설명서 (21 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (29 페이지), 사용자 설명서 (22 페이지), 사용자 설명서 (19 페이지), 사용자 설명서 (30 페이지)

MSI MAG Series 사용자 설명서

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.
∙ All cautions and warnings on the device or User Guide should be noted.
∙ Refer servicing to qualified personnel only.
Power
∙ Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
∙ If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
∙ Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
∙ Always disconnect the power cord or switch the wall socket off if the device would
be left unused for a certain time to achieve zero energy consumption.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙ If this device comes with an adapter, use only the MSI provided AC adapter approved
for use with this device.
Environment
∙ To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device on a soft, unsteady surface or obstruct its air ventilators.
∙ Use this device only on a hard, flat and steady surface.
∙ To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.
∙ To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙ Do not leave the device in an unconditioned environment with a storage temperature
above 60℃ or below -20℃, which may damage the device.
∙ The maximum operating temperature is around 40℃.
∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙ Always keep strong magnetic or electrical objects away from the device.
22