MSI MPG X570S Carbon EK X 사용자 설명서 - 페이지 7
{카테고리_이름} MSI MPG X570S Carbon EK X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI MPG X570S Carbon EK X 11 페이지. Monoblock
페이지 인쇄
Thermal PAD F 1.0 mm (120 x 16 mm)
120 mm
1 mm
THERMAL PAD F 1.0mm
APPLYING THERMAL COMPOUND
Apply thermal compound on CPU heat spreader (IHS) with enclosed EK-TIM
Ectotherm thermal grease. The quantity of about two rice grains is just about
right. There is no need to cover the whole IHS. Applying too much thermal
grease will have negative impact on the cooling performance!
CUTTING THERMAL PADS
Your block comes with thermal pads which needs to be trimmed in order
to fit the voltage regulation area (MOSFET) on the motherboard's circuit
board.
1. Thermal PAD F 1.0mm - (120 x 16 mm) EAN: 3830046996732
WARNING: Dimensions on pictures below are scaled.
PLACING THERMAL PADS ON THE
MOTHERBOARD
Place thermal pads on PCB as shown on the picture.
Please remove the protective foil from both sides of the thermal
pads prior to installation!
- 7 -