Toshiba TLP511E 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Toshiba TLP511E에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP511E 33 페이지. 3lcd data projector
Toshiba TLP511E에 대해서도 마찬가지입니다: 기술 교육 매뉴얼 (47 페이지)

페이지 인쇄

Electronic parts are susceptible to static electricity and may easily damaged, so do not forget to take a proper

grounding treatment as required.

Many screws are used inside the unit. To prevent missing, dropping, etc. of the screws, always use a magnetized

screwdriver in servicing. Several kinds of screws are used and some of them need special cautions. That is, take care

of the tapping screws securing molded parts and fine pitch screws used to secure metal parts. If they are used

improperly, the screw holes will be easily damaged and the parts can not be fixed.

3. DISASSEMBLING

3-1. Main Unit (1)

3-1-1. Document Camera (TLP511U/E)

1. Remove 4 screws (1) and remove document camera

rear plate.

2. Disconnect 1 connector (2) connected to the document

camera.

3. Remove 5 screws (3) and remove the document

camera.

Document camera

Connector (2)

Fig. 3-1-1

CAUTIONS BEFORE STARTING SERVICING

Screws (3)

Document camera

rear plate

Screws (1)

3-1-2. Top Cover and Speaker

1. Remove document camera. (TLP511U/E: Refer to Fig.

3-1-1.)

2. Remove top tag and remove 1 screw (1).

3. Remove 6 screws (2) and lift up top cover while

pressing section A of the top cover.

4. Remove speaker connector (3) and remove top cover.

5. Remove 2 screws (4) securing speaker holder, and

remove speaker from speaker holder.

Screws (2)

Top cover

Section A

1-2

Top tag

Screw (1)

Screws (2)

Speaker

Screws (4)

Speaker

connector (3)

Fig. 3-1-2

Screws (2)

Speaker

holder